Blog

Tips for Commercial Lawn Mower Maintenance

0Comments

Once you have your own commercial lawn mower, it can be easy to forget about or avoid maintaining it. However, keeping up with commercial lawn mower maintenance and cleaning does not have to take too long or require much effort. You can greatly improve the quality and life of your commercial lawn mower with these easy steps.

Pay Attention to the Air Filter

The air filter in your commercial mower needs special attention and care as it has an important job. In a properly working mower, it will take in air from the top, push it through the filter, and release air at the bottom. This allows all the dirt and debris sucked in with the air to be deposited at the top of the filter. Without the filer, the dirt will travel through the foam layers of the mower, stopping the mower from functioning properly.

Check and clean the air filter with these methods:

1. Clean the filter by first brushing off the dirt with your hands. Then wash the filter with soap and water – dish soap works best. Dry as best you can with paper towels, and let it air dry in the sun.

2. Re-oil it after cleaning to ensure that the dirt remains trapped in the filter. You can do this by taking a Ziploc bag of oil and submerging the filter in it. Work the oil into the filter by squeezing the outside of the bag. Take the filter out and remove excess oil with a paper towel and place it back inside the lawn mower.

Clean the Underside of the Mower

Every day, you should check and clean the underside of the lawn mower deck – or at least after every use. This is very important to do because this area of the lawn mower gets very dirty quickly. As you mow the grass, dirt and grass clippings stick to the underside of the mower deck. If you don’t clean it regularly, the layers of grass and dirt will accumulate, causing the deck to rust and reducing the quality of air flow.

To clean it without removing the deck from the mower, use a method to lift the mower, like a jack stand or forklift. Then wipe off the dirt and debris with a scraper or putty knife. Avoid scraping too hard. If you routinely clean the deck, it should be easy and painless to clean it.

Sharpen the Blades

If your lawn mower has dull blades, it will tear the grass rather than cut it. When grass is torn, the ends will become jagged and turn brown – even if you are watering your lawn adequately. So, it is important to sharpen the cutting blades at least three times a year.

You can sharpen them yourself using a jack stand to prop the mower on its side. Then remove the spark plug (to prevent the motor from starting) and use a wrench to remove the nut that secures the blade to the mower. Gently remove the blade and sharpen using a file or grindstone. When you are finished, put the blade back on the mower.

Check Tire Pressure

Just like your car’s tires, your mower’s tires will need to be checked too. Because this is the simplest type of commercial lawn mower, it can easily be overlooked. However, you want to make sure to check the tire pressure regularly as lower pressure leads to a more unbalanced cut.

Run the Engine Efficiently

This means to run the engine at right RPMS (revolutions per minute). Every mower has a different optimal RPM, so make sure to check the handbook. Running the mower at the right RPM will drastically improve the cut.

Lawnscape has been serving Southern California since 1979. We service turf and ground cover areas, caring for both professionals and homeowners alike. Our fertilization, weed, insect and disease control services will ensure that the grass will always be greener on your lawn.

Share